Design
- 1.High quality design taking advantage of mass production know-how.
- Design specifications are optimized taking both quality and cost into consideration.
- 2.Total service including cost studies and VA suggestions in the design stage.
- Research into the most efficient sizes that minimize waste.
- 3.Simulations in the design stage (reducing the number of evaluation cycles based on prototypes).
- Impedance control
- Simulations of heat and noise
Prototyping
- 1.Rapid Response
- We provide rapid prototyping with the same quality level as the production units.
- 2.Mass Production Verification
- Suggestions for corrections to mass production problem areas while yet in the prototyping stage.
- VA suggestions for mass production.
(CAD Room)
Schedule
| Double sided TH | 4 layers | 4BVH | 6 layers | 6BVH | 8 layers | 8BVH | Laser Process | ||
|---|---|---|---|---|---|---|---|---|---|
| 1-Layer-Build | 2-Layer-Build | ||||||||
| Quick 1 | 3days | 3days | 5days | 4days | 6days | 4days | 6days | 6days | 8days |
| Quick 2 | 2days | 2days | 4days | 3days | 5days | 3days | 5days | 5days | 6days |
| Quick 3 | 1.5days | 1.5days | 3days | 2days | 4days | 2days | 4days | 4days | 5days |
| Quick 4 | 1day | 1day | 2.5days | 1day | 3days | 1.5days | 3.5days | - | - |
(The standard production volume is about 20 sheets)
Options
| DRC (design rule check) | 1 day |
|---|---|
| Electrical check (flying checker-compatible) | 1 day |
| Impedance measurements | 1 day |
| Plating with other metals (for example, gold flash) | 2 day |
Inquire with your sales representative separately regarding build-up processes.
Required Materials
- Circuit board specifications
- Dimensions (outside dimensions, hole diameters)
- File structure diagram and aperture list)
- Gerber data (including data on outside dimensions)
- NC data
Method by which to Receive Data
- FTP server/client
- MILINE95 Ver 2 (MILINE2 compatible)
- E-Mail address
- X File3/2
(Design room)
